* chore(pc): convert simu/simulator/companion to use SDL2
* switch companion builds to SDL2 - OSX is not converted
the linux change is done a bit hacky, it should be done by updating the EdgeTX docker container
* update build system setup scripts
* add compatibility for old and new SDL2 cmake integration
* fix windows installer
* fix simulator audio on windows by using DirectSound vie SDL2
* fix windows audio with SDL2
enable simu for windows builds
* remove workflow changes for linux builds, this needs to be fixed in the build environment
* fix OSX build, thx @pafleraf
* fix windows audio for companion and simulator with SDL2
* select SDL2 branch of the build-docker environment
* Revert "select SDL2 branch of the build-docker environment"
This reverts commit da801609d78e1aed513ad7d9d8ab3ebded2900b9.
* fix tests with SDL2
* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* Moved getFieldInfo and getValue up right after related functions
* Modified getValue to return a valid status, so Lua can see if it got zero because of invalid source id
* Added new getSourceValue Lua function per Issue #781
Also added alias getSourceInfo for getFieldInfo
* Updated according to comment https://github.com/EdgeTX/edgetx/pull/2175#issuecomment-1245605114
* Replaced isFresh() by !isOld() as requested in https://github.com/EdgeTX/edgetx/pull/2316#issuecomment-1246759370
* Clean up `lua_pushtablenil` - tables cannot hold nil values
* Changed isFresh() to !isOld() ... AGAIN
* Return both `!isOld()` and `isFresh()`
* Return nil for all values if the item does not exist
* Return 0 instead of pushing three nil values
* Update documentation
Use `-DSPACEMOUSE=YES` CMake option to activate on Horus color targets.
Co-authored-by: Niel Horne (elecpower), Raphael Coeffic (raphaelcoeffic) and Peter Feerick (pfeerick).
* First build
* Fix X9
* Update api_general.cpp
* Update translations.h
* clean up translations
* fix: B&W option handling, remove magic numbers, cleanup
- Remove references to invertRotary, change to RotEncDir or similar
- Add compatabilty importing to companion, firmware
- Rename Lua API call
- Move magic numbers to enum
- Improve B&W option handling so it doesn't apply changes while in menu
* chore: yaml regen
* fix: Add missing guards for X9D/X9D+
* fix: Wrong enum name in simu
* fix(cpn): Use correct names for UI elements
* fix: Translations
* fix: Allow `rotEncMode` in all yaml due to x9d var
Of the three X9D variants, the X9D+2019 is the only one that
has a rotary encoder as standard. However, as the base config
file is for the X9D, this meant it wasn't reading or writing the
config value. Rather than add a seperate config file for it for
a single variable, simple to just allow it across all targets.
* fix: Companion string, change colorlcd to `Choice`
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* feat: Add option for rotary encoder direction
Based heavily on opentx/opentx#8852 by @3djc
* companion ui elements
* Cleanup
* Hook up UI, reading setting from yaml
* Teach simulator about rotEncDirection
* Simu and radio default scroll direction correction
Otherwise the "default" would be the opposite to how it has always been
* Remove what will be a confict with fix in #1586
* Wasn't using rotEncDirection consistently
* Zorro RE dir is opp to TX16, TX12, TPro, X9D+2019
* Warn on connected model (#1466)
* Make it so not confirming aborts model change
* add delay before accepting disconnected telemtry
* Add power off delay
* Remove whitespace + time unit in name
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Show true unscaled and unfiltered analogs for diagnose purpose on the analog diagnose screen.
Tested on physical RM TX16S, not yet tested on B/W targets.
* Changed to decimal display also on B/W targets. Tested now with RM Zorro as well.
* 5 fps refresh rate of the raw analog values. Much nicer to look at.
* Time-changing 3 views for color radios: std., filtered raw with deviation, unfiltered raw.
* Corrected deviation view output to not use old values.
* Changed analogs diagnose page to user navigatable TabsGroup with 3 tabs.
* Added fourth analog diagnose tab to show minimum and maximum values and the range (difference between min and max).
Left touch screen and IMU output tests only on first page (should also move in the future to their respective dedicated pages).
* Use Std. JitterAlpha filtering for Deviation screen to minimize delay, omit filtering for FlySky digital hall gimbals - not necessary, the signal is stable enough.
* 2 analog diagnose pages for 128x64 B/W radios: calibrated analogs and raw values with display output limited to 5 frames-per-second due to visibility reasons.
* Added 2 analogs diagnose pages also for 212x64 display B/W radios.
I was only able to simulate it, not tested on real hardware.
* Support also radios that do not have PageUp/PageDn keys, but only Page key (e.g. X7).
* Better key handling and improved style thx to @pfeerick
[Lua] Add setStickySwitch and getLogicalSwitchValue (#1056)
* Adds setStickySwitch to set the value of a stick logical switch
* Adds getLogicalSwitchValue to get the value of a logical switch by index
* added a new special function to disable the touch screen
* Bump libopenui
* Don't try to disable touch if no hardware touch
* Disable processing of SF if no touch hardware
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
This has the added benefit of precision increase and also avoiding unnecessary computation. Needed to change to uint32_t, as the jitter removal computation would otherwise go over the 16-bit range. As 16-bit computation can be left for "normal" sticks, added a special define just for FLYSKY_HALL_STICKS.
In addition this PR changes back the radio analogs diagnose page second column also for FlySky digital hall sticks to show +/- 100 again, as now with first and second column we already cover all internal ranges used.
Tested on RM TX16S with FlySky digital hall sticks.