Commit Graph
1505 Commits
Author SHA1 Message Date
Kilrah d775a09095 Fix X10 backlight (min level of 46 to prevent display interference, must be hardware problem, FrOS uses same lower limit) 2017-10-29 16:02:51 +01:00
Arne SchwabeandAndre Bernet 318d77e863 Show telemetry UART errors in statistics debug page (#5185)
* Show telemetry errors in Debug statistics

This introduces a second debug page on X7 and X9 platform since the original page is almost full.
Also fix the X7 menu navigation to be able to go back and forth

* Fix compile error on platforms without key_page

* avr-gcc bails on missing eolf

* Fix navigation

* Just keep pushing ....

* compile fixes of 9x and use chainMenu

* Fixes

* Align x9 behavior to x7 (for once !)

* Allow total timer reset on both long menu and long enter

* Improve 9x handling
2017-10-29 09:06:17 +01:00
Kilrah 64a4f10ec7 X10 simu upright and working 2017-10-09 09:56:37 +02:00
Kilrah 380adaad3b Fix X10 simu crash 2017-10-09 09:41:18 +02:00
Bertrand SongisandGitHub cbd824eb10 [X10S] PWM sticks support - with autodetection (#5251)
[X10S] PWM sticks support - with autodetection
2017-10-01 09:07:07 +02:00
Arne SchwabeandBertrand Songis fd782538d8 Implement SBUS output for external module bay. (#5225)
* Implement SBUS output for external module bay.

* Bugfixes and Companion support
2017-09-29 18:29:39 +02:00
Bertrand Songis 39386676d8 External module on X10 now tested OK 2017-09-21 23:15:50 +02:00
Bertrand Songis 7f7dfeab12 Compilation fix 2017-09-20 21:09:49 +02:00
Bertrand Songis 450ba42558 External module not working on X10 2017-09-20 09:16:11 +02:00
Kilrah 6bb7ba3795 Fix typo 2017-09-18 18:02:00 +02:00
Bertrand SongisandGitHub 509df44c4f X10 fixes (#5221)
1. BackLight < 42 was bad
2. SWB D E F direction inverted
3. Wrong battery voltage
2017-09-17 21:40:51 +02:00
Roderick TaylorandBertrand Songis 9cb4b782e1 Fix FrSky D cable telementry for 9XR PRO and DJT module. (#5220)
* Fix FrSky D cable telementry for 9XR PRO and DJT module.

* Revert a breaking change.
2017-09-17 19:10:45 +02:00
3djcandBertrand Songis 6f3577c9a5 x9e with horus bt module (#5214)
* Basics to allow Horus BT module on X9E

* wip

* Temporary hack to prevent X9E to enter reset loop

* The wait game starts :)

* Temporary compil fixes

* More sensibles defines
2017-09-16 16:08:21 +02:00
Arne SchwabeandBertrand Songis 7e21e13ec9 Disallow writing running firmware (#5208)
Overwriting running firmware leads to crash and incompletely written firmware
2017-09-12 18:49:40 +02:00
Kilrah 09f257026e Disable Serial USB choice if !DEBUG (no function currently) 2017-09-10 21:23:36 +02:00
Kilrah e59afb6ec1 Enum was misaligned with UI text... 2017-09-10 20:50:05 +02:00
Arne SchwabeandBertrand Songis b7acee5723 Allow USB mode selection on USB connect (#5193)
Allow all USB modes to be compiled in at the same time
2017-09-10 17:28:08 +02:00
sirPernaandBertrand Songis 390342af78 Crossfire baudrate selection for X7 support ( fixes #4922 ) (#5194)
* Crossfire baudrate selection for X7 support ( fixes #4922 )

* Moved baurate selection to general settings

* renamed mavbaud to telemetryBaudrate for ARM targets
translation added

* typo fixed
2017-09-10 17:10:47 +02:00
Bertrand SongisandGitHub bd6bd4deeb Bluetooth fixes (reconnection issues, telemetry mode not working) (#5186)
Bluetooth fixes (reconnection issues, telemetry mode not working)
2017-09-05 18:21:29 +02:00
Arne SchwabeandBertrand Songis e16b48db30 Reduce RF_PROTO_OFF logic, disable R9M Sport out when internal telemetry is on (#5159)
* Remove most of the special logic associated with RF_PROTO_OFF

This simplifies code in many areas since the internal module does not require special handling and also fixes a few bugs with INTERNAL_PPM

* Disable R9M sport option if internal module has telemetry

* Fix X12s build

* Use macros instead of direct comparisions

* Fix sport bit sent the wrong way. Rename S.port out to Telemetry

* Compile fix
2017-08-15 21:47:45 -07:00
3djcandBertrand Songis 5a8a074f0c Neutralise BT on X9E, unless DEBUG is defined (#5148)
* Neutralise BT on X9E, unless DEBUG is defined

* Adjust to Bertrand comments
2017-08-14 22:03:26 -07:00
Bertrand Songis 0e139fd0d6 X10 HAL update
- ADC OK
2017-08-12 16:15:40 +02:00
Bertrand Songis de00d223c4 X10 HAL update
- LCD OK
 - Backlight OK
 - Sound OK
 - Keys OK
 - Haptic OK

 - ADC KO
2017-08-12 10:48:38 +02:00
Bertrand SongisandGitHub 8d8fef23c9 Bsongis/x7 bluetooth (#5068)
* Trainer Bluetooth support added
X7S board added (X7 has no bluetooth while X7S has)
X10 HAL updated

* Bluetooth Telemetry

* En fix
Add all languages

* Temporary test for @bsongis

* Missing translations
2017-08-12 00:49:54 +02:00
Bertrand SongisandKilrah 541aa459cf Lua drawBitmap on X7 2017-08-04 12:08:10 +02:00
3djcandBertrand Songis 4c40aec8b3 x7/x9e startup review (#5033)
* Turn on X7 like it is done on X9

* 4 squares like shutdown + prep for firmware option to disable

* Compile option

* - rollback firmware option
- fast one second power on
- unchanged power off
- animation added for x7 power on
- animation for power off changed to 'removing' quarter instead of adding (ie the power on anim fills in, the power down fills out)

* Cosmetics

* Cosmetics
2017-06-18 20:55:49 +02:00
3djcandBertrand Songis b397af1bac Fix overflow when firmware filename is too long (#4971) 2017-05-30 18:36:36 +02:00
3djcandBertrand Songis 4f5f241669 Fix opentx-9x-autoswitch-autosource-dblkeys-battgraph-telemetrez-sp22-stickrev-pgbar-en.hex (#4883) 2017-04-30 23:19:43 +02:00
Bertrand SongisandGitHub 1ad8769fff [Horus] Vector table updated (#4842) 2017-04-23 10:11:01 +02:00
reichiandBertrand Songis b5f5e64d95 Fix DS3231 RTC read/write on AR9X (#4819) 2017-04-19 10:55:48 +02:00
3djcandBertrand Songis fa951acf40 Review line ending handling (#4820)
* New line end handling rules

* Normalize all the line endings
2017-04-19 10:54:43 +02:00
Arne SchwabeandBertrand Songis 54c1f22312 Multimodule has a pulldown resistor and does not work with open drain, use push pull instead (#4808) 2017-04-17 10:25:56 +02:00
Bertrand SongisandGitHub 2b41ba94ff Update opentxsimulator.cpp 2017-04-17 10:23:09 +02:00
Arne SchwabeandBertrand Songis 471c38628f Fix key variable not initialised (#4790) 2017-04-17 10:22:21 +02:00
3djcandBertrand Songis 95bc595f50 Better manage additional switches declared as toggle or 2pos (#4793) 2017-04-16 21:13:51 +02:00
Max Paperno 077a651dc3 [Simulator] Fix intermittent crc errors with telemetry simulator. 2017-04-11 21:21:09 -04:00
Max Paperno 629d82fe27 [Simulator] Fix trims issue with AVR simulators (build failure since 57dc015); Fix possible array bounds issue if data is corrupt. 2017-04-07 03:50:40 -04:00
Max PapernoandBertrand Songis 57dc0159d6 [Simulator] Asynchronous SimulatorInterface & a few new features. (#4738)
* [Simulator] Create RadioKeyWidget class for UI buttons & refactor ButtonsWidget; Refactor SimulatedUIWidget (and subtypes) to use new RadioKeyWidgets/ButtonsWidget; Centralize help text for key mappings and get creative with some icons; Simplify some radio UI setups with rectangular buttons.

* [Simulator] Convert all simulator data I/O to signals/slots mechanism:
    * SimulatorInterface/OpenTxSimulator:
       - Now inherits from QObject to allow signal/slot interface;
       - Allows data exchange on a per-item basis (eg. each I/O value is treated separately instead of sending whole arrays or structs of data);
       - Checks for data changes and only emits signals when change is detected (GUI can now assume only new values are being sent);
       - Manages its own 10ms timer (doesn't rely on GUI to do that);
       - Sends "heartbeat" signals @ 1Hz for status monitoring;
    * Simulator GUI:
       - All data is exchanged between GUI elements as well as SimulatorInterface via signals/slots using standardized methods;
       - Data is sent immediately, and only, when actually changed (eg. a control is moved) instead of in bulk at specific time intervals;
       - Similarly, an asynchronous method is used for reading incoming data, w/out timers or loops;
       - Improve VirtualJoystickWidget to be more encapsulated and configurable;
       - Pause telemetry simulator if window is hidden;

* [Simulator] Move SimulatorInterface instance to separate thread, ensure safe asynchronous operations & proper timer interactions; Protect/remove some functions, & reorganize the order (cosmetics).

* [Simulator] Traces are now delivered to OpenTxSimulator and one or more QIODevice(s) can be added as recipient(s); Add SimulatorInterface::getCapability() for compile-time settings; Remove reversed POT1/SLIDER1 mixer exception (Taranis) requirement for SIMU; Fix plus/minus key delay on wheel event w/out encoder.

* [Simulator] Add current knob/slider/trim input value in tool-tips (KnobWidget and SliderWidget).

* [Simulator] Fix trims widget internal value not properly updating, and remove trim influence on virtual joystick X/Y value display (closes #4671).

* [SimulatorInterface] Add handling of transmitter input voltage, including a rough conversion of volts to ADC value for different boards, and default battery volts lookup function; Clear analogs array before starting.

* [Simulator] Add SimulatorInterface::init() method to separate pre-startup tasks; Report actual trim range, not just extended on/off; Change how radio widget states are restored; VirtualJoystickWidget: Connect trim changes directly from simulator, connect joystick events directly, report stick mode directly instead of setting values/constraints externally.

* [Simulator] Calculate default Tx V input based on configured range in radio settings (or warning V+2 for radios which don't support a range).

* [Simulator] Add functional aux. trims for Horus (closes #4699).

* [Companion] Remove problematic QMessageLogContext from AppDebugMessageHandler::messageOutput().

* [Simulator] Prevent trim change via slider if disabled for flight mode (closes #4600).

* [OpenTxSimulator] Fixes for Qt < 5.4.

* [OpenTxSimulator] Fix slot name.
2017-04-02 12:17:37 +02:00
Max PapernoandBertrand Songis 5dabe53af4 Minor misc. fixes (#4729)
* [Simulator] Remove extraneous format value in microsTimer; Better way to delete SimulatorStartupDialog (in case no event loop starts).

* [Simulator] No helpers dependency for SimulatorStartupDialog.

* [simpgmspace] Rename micros timer function and make externally available.

* [Companion] Fix possible uninitialized value in TreeModel (compiler warning).

* [multi_arm] Fix minor compiler warning (MSVC: "unsafe mix of type 'uint8_t' and type 'bool' in operation").

* [lua] Fix compiler warning ("'data' may be used uninitialized in this function").

* [OpenTxSimulator] Fix analogs array range.

* [Simulator] Auto-start simulator when SimulatorMainWindow is first shown (vs. before it was shown).

* [Simulator] DebugOutput: prevent possible mutex deadlock on buffer overflow (force queued connection for Qt < 5.3).

* [Companion] Display calibration data for Horus joysticks (MOUSE1/MOUSE2)
2017-04-01 08:13:24 +02:00
Damjan AdamicandBertrand Songis 9c7c8244f4 Fixes #4715: model notes were read from the settings path, but should be read from SD card path (#4728) 2017-04-01 08:11:16 +02:00
Damjan Adamic fa275793ad simpgmspace CoGetOSTime() was returning wrong values (too big) 2017-03-31 19:52:20 +02:00
Max PapernoandBertrand Songis 3eb39ddac2 [build] Add "all-libsimulators" target to build all simulator flavors at once. (#4710)
* [build] Add "all-libsimulators" target to build all simulator flavors at once.

* [build] Refine the "all simulators" target setup and deal with GNU 'make' parallelism issue (ninja=faster); rename to "all-simu-libs".
2017-03-29 15:46:48 +02:00
Max PapernoandBertrand Songis 6709c55fea [Simulator] Fix timing issues in all AVR simulators on Windows (MSVC) (#4709)
* [simpgmspace] Fix 2MHz and 16KHz timers on MSVC builds (fixes LCD/key/switch response delay on all AVR simulators); Introduce experimental use of Qt to simplify x-platform code (disabled by default).

* Qt timer scaling fix.
2017-03-29 15:44:51 +02:00
Max PapernoandBertrand Songis f5ab145d2f [Companion] Show custom control names throughout the UI (& internal refactoring) (#4693)
* [Companion] Introduce new Boards class to further consolidate hardware metadata and remove some globals.

* [Companion] * RawSource::toString() and RawSwitch::toString() can now return custom hardware names (if given a GeneralSettings object) for the following types (respectively):
    SOURCE_TYPE_STICK, SOURCE_TYPE_SWITCH, SWITCH_TYPE_SWITCH, & SWITCH_TYPE_MULTIPOS_POT;
* RawSource::isPot() and isSlider() can now return their own index position in potConfig[]/sliderConfig[];
* Switch indicator strings can be localized if necessary.

* [Companion] Refactor model printers to use new RawSource/RawSwitch capabilities; Simplify model-to-printer mapping scheme in multimodelprinter; Use const ModelData pointer.

* [Companion] Refactor how RawSource and RawSwitch selection combo boxes are populated, using cache-able data models instead of direct manipulation; Refactor some other Helpers function into their own namespace.

* Cosmetics & forgotten qualifier.
2017-03-27 19:02:19 +02:00
Max PapernoandBertrand Songis d68778ec81 [Simulator] Virtual joystick tweaks. (#4666)
* [Simulator] Create a reusable RadioTrimWidget; Move all trim-related enums to boards.h; Make sure aux trims are accounted for in SimulatorInterface; Trims now use toolbuttons with icons instead of pushbuttons with text.

* [Simulator] New buttons & icons for virtual joystick axis hold/fix toggles; Joystick ball is now slightly scaled to stick area.

* [Simulator] Virtual joystick now "follows" mouse clicks within the stick area (left-click on empty space will attract the control node).
2017-03-22 21:05:27 +01:00
Max PapernoandBertrand Songis 4aa0c1bbe4 [simulation] Fix some potential crashes & 26 memory leaks, improve LCD redraws. (#4634)
* [simulation] Hardening: Fix some potential crashes & 26 memory leaks, improve LCD performance.
  * [simpgmspace] Init trims; Make sure `REa` is really defined (to match board files).
  * [simpgmspace][opentxsimulator] Verify current running state before start/stop; Move rotary enc. init.
  * [simpgmspace][LcdWidget] Improve performance by moving LCD content change check to lcdRefresh() & limiting LcdWidget refresh time to 60 fps max.
  * [simueeprom] Ensure thread could be started, set default running state to false.
  * [simufatfs] Fix paths report trace.
  * [eepromimportexport] Fix memory leaks resulting from import debugging scheme being used.
  * [customdebug] Introduce new scheme for custom debug output in compliance with Qt recommendations (see docs for QLoggingCategory).
  * [opentxeeprom] Fix extra conversion table cache elements being created and also not properly deleted (and hence leaking).
  * [opentxinterface] Unregister EEpromInterfaces in unregisterOpenTxFirmwares();
  * [storage] Unregister storage factories on exit (fixes leak); create virtual StorageFormat/StorageFactory destructors (prevents warnings).
  * [helpers] GVarGroup now emits own signal, no need to pass ModelPanel pointer (removes dependency on modeledit.h)
  * [DebugOutput] Clear simulator trace hook before exiting (prevent possible issues); Fix leak and possible bad QString allocations when reading from buffer; Fix leak with combo box event filter.
  * [TelemetrySimulator] Fix leak by deleting LogPlaybackController object on exit; Only set up data fields once; convert timers to static.
  * [build] Consolidate all Companion/Simulator shared items in `common` library to reduce build time/etc (node & edge still remain awkward).

* [simulatorwidget] Delete removed spacer object (previously-forgotten "26th" leak).

* [DebugOutput] Fix stray trailing characters issue with new text buffer allocation (from previous commit); Increase maximum buffer sizes to better accommodate slower systems.

* Cosmetics.
2017-03-21 07:43:40 +01:00
Max PapernoandBertrand Songis 1973eaf67c [Simulator] Improve CoGetOSTime() for MSVC. (#4635)
* [Simulator] Increase resolution of CoGetOSTime() on Windows MSVC (possible fix for #4529, ref. #4342).

* Return total time, not delta time.

* Improve efficiency.
2017-03-19 20:07:30 +01:00
Franck AguerreandBertrand Songis 49d1aafc1b Jivarofad/m2560 update (#4593)
* New drivers : buzzer/speaker, voice wtv20 / jq6500 , i2c

First commit, testings to be done

* Voice correction

* Better way to drive voice modules

Same thing as LCD drivers

* Issue #2337 (error mismatch) solved

* Font correction

* Fonts correction again

* oups...

* Voice modules (Companion) & flash saving (ST7920)

* Documentation update

* I2C driver correction

* Mega2560 directory renamed to mega2560

* M2560 driver correction

* Voice directory correction

* Voice=ON does not works with MEGA2560 (OFF/WTV20/JQ6500)

* Compliant to cmake documentation

* On M2560, audioAVR use playnumber et playduration declared in voice.h
Don't know why, must be discuted...

* ‘{’ token forgotten

* Simplier way for AVR voice
2017-03-18 09:44:47 +01:00
3djcandBertrand Songis 2144bb77e3 Remove mixermon option (make it always true) (#4573)
* Remove mixermon option (make it always true)

* Cosmetics

* Compile fix
2017-03-11 10:26:05 +01:00
Arne Schwabe 4c42769104 cosmetics (remove ifdef indentation for HORUSSTICKS) 2017-03-10 13:05:50 +01:00