* enhance msys2 build script
- stop on error
- support different branch's (not only main)
- add all the radio option on top of the script
- support re-run of the build (handle existing dir & git pull)
- add logs to follow the progress steps (especially in case of failure)
Authored-by: oshmuely <AbCd321654>
* fix: enable AUX1 power on TX16S with IMU_LSM6DS33
* Add some delay when powering I2C bus
---------
Co-authored-by: raphaelcoeffic <raphael.coeffic@frafos.com>
* fix(imu): reset error counter on successful IMU query
Please note that the HAL already handles busy I2C bus, so that we should not run into the case where the bus is used and another query is started. However, if that happens, HAL_BUSY will be returned, which leads to -1 being returned in our functions, thus increasing the error count until the sensor stops working.
* fix(imu): move imu init into mixer task
Fixes a race condition between init and use.
* fix: sort mixer lines after loading model
Fixes#2806
* fix(cpn): sort mixer lines after loading model
* More efficient swap
---------
Co-authored-by: elecpower <neilh713@tpg.com.au>
* A few additions and minor changes
* Minor changes
* Added timer string for PR #3173
* Missing save and delete theme
Added missing strings for Save theme and Delete theme
* Adjust trainer setup layout to better use space and avoid scrolling.
* Adjust padding for landscape layout.
* Change text for trainer mode to 'Add' and 'Replace' instead of '+=' and ':='. Adjust layout to fit. Copy translations from TR_VMLTPX strings.
* feat(cpn): Initial Radiomaster Boxer support
* fix(build): Halt if invalid simulator plugin specified
* fix: 6POS not correctly defined
* chore: Less EEPROM stuff needed
* Start of simulator support
* Enable left buttons and fix area mapping of page up and down
* fix(cpn): Internal reference to pots
---------
Co-authored-by: elecpower <neilh713@tpg.com.au>
* - all telemetry sensor name definitions in one place (untranslated.h)
- all telemetry sensor name definitions follow the naming convention STR_SENSOR_<sensor>
- eliminated one redundant definition
- editorial updates to telemetry protocols code to reflect the naming convention changes
- re-introduced translations in da.h (STR_SENSOR_THROTTLE and STR_SENSOR_SPEED)
- re-introduced translation in it.h (STR_SENSOR_GPSDATETIME)
- re-introduced translation for fr.h ( STR_SENSOR_BATT)
- saved 160 Bytes of flash
* removed obsolete translation
saved 280 byte flash memory in total
* finally removed extern const char STR_MENUTEMPLATES[]; definition
adjusted da.h, fr.h, it.h local sensor name definitions to naming conventions STR_SENSOR_<senosr>
* corrected merge
removed obsolete #ifdef
* some more obsolete ones
* added TW and CN translation for TR_PERIOD and TR_INTERVAL
fixed problem in /radio/src/gui/colorlcd/fullscreen_dialog.cpp preventing builds for CZ, IT and FR languages
* chore(lua): revert useless c light function change
This change was part of the eLua LTR patches (based on 5.1), whereby this feature was already integrated in Lua 5.2.
* feat(lua): port of NodeMCU Lua53 read-only tables
# Conflicts:
# radio/src/lua/CMakeLists.txt
# radio/src/lua/api_general.cpp
* fix(nv14): missing SDRAM definition
* fix: l_mathop
* fix: use float functions in drawPower()
* fix: ltable resize
* fix: correct name is "bit32"
* fix: first Lua context must be closed last
As the lookup cache is attached to that one
* Revert to Lua using double
* Ensure byte-code compatibility
* Fix possible compatibility issue with `lua_typename`/`luaL_typename`
* Fix Bitmap symbol table
* Re-add table lib for COLORLCD
* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* Updated translations, error fixes etc
* Minor changes
* Minor updates
* Update for PR #2998
* Added strings for PR #2998
* Minor error fix
* Two new strings translated
* Fixed spelling mistake
* Another minor fix
* Added translations for PR #3062
* Just a few corrections
* Add files via upload
New translations added
* Changes after PR #3119 translation clean up
PR #2995 didn't take into account the data model storage actually does change when you change a variable name.
Boxer yaml generation was missed in earlier PR.
* chore: Run `generate-yaml.sh`
* chore(cpn): carryTrim -> trimSource
* fix(build): Boxer missing from `generate-yaml`
* dodgy attempt to read old carryTrim
* fix: Don't break the byte boundary + reorder
* fix(yaml): indentation for attributes that should not be output
* chore: Regenerate YAML after rebase
---------
Co-authored-by: raphaelcoeffic <raphael.coeffic@frafos.com>
* LVGL conversion for telemetry.
* Move RSSI section after Sensors section.
* Replace empty text box with call to grid.nextCell(). Center 'fresh' data indicator vertically.
* Fix build error after rebase.
Single HAL headers/modules are enabled by changing the defines in `stm32f2xx_hal_conf.h` / `stm32f2xx_hal_conf.h` rather than being directly included into this file.
* Change global variables layout to better match other pages.
* Move internal classes for global variable page from .h to .cpp file. Convert header text in edit page to StaticText object and remove 'paint' function.
* Fix build error.
* chore: Formatting
* Convert theme save and delete dialogs to use ConfirmDialog popup instead of full screen alert.
Add strings for translation.
* Update translations.
* Update translations.
* Update translations.
* CZ translation
* chore: Formatting
* Call 'cancelHandler' if RTN button used to exit ConfirmDialog.
* Possible fix for 'save theme' dialog not working in the theme editor.
* Update logical switch layout:
- Use LVGL flex / grid layout
- Same height for all buttons
- Display logical switch name inside button so entire row acts as button
- Consistent press handler for buttons (always show popup menu)
- Group buttons for empty switch in lines to utilise space
- Remember selected button and reselect after edit.
* Fix incorrect switch being selected when changing tabs.
* Fix selection of focussed button when using 'Clear', and switching tabs.
* Reorganise logical switch edit code.
* Change button style to match input/mixes/outputs pages.
* Single line overview on landscape LCD layout. Convert to using grid and lgvl objects for overview buttons.
* Remove redundant flag.
* Remove logic that tries to center scroll around selected button (not working).
* Remove empty buttons and add a single '+' button at the bottom to match inputs and mixes.
* Remove unused code.
* Correct string usage.
* Add long press handler for quick access to the '+' button functions.
* Display logical switch operation and parameters as an expression. Add 's' suffix to time values.
* Adjust spacing.
* Set V2 number edit control to automatically resize and fit content to prevent clipping of large values.
* Revert to fixed column layout.
* Adjust grid spacing.
* Convert the logical switch view in the channel monitor to LVGL flex.
* chore: Formatting
Co-authored-by: Phil Mitchell <phil.a.mitchell@gmail.com>
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* fixes https://github.com/EdgeTX/edgetx/issues/2965
Changes:
- the log period range is now 0.1s to 25.5s
- upon creation of a new SD Logs SF the period is initialized to 1.0s
- text "Value" is changed to "Period" to indicate parameter represents the log period
ToDo:
- translations for "Period" if desired
rebase due to #2992
* changed Period to Interval
Added translations for DA, DE, EN, IT, PL
* added defaults for TR_INTERVAL to language files
* fixed problem with too many leading zeros for intervals less than 1s.
before: 00.5s
after: 0.5s
* added CZ translations for TR_PERIOD and TR_INTERVAL
changed EN TR_FUNC from "Func" to "Function"
* updated TR_FUNC for CZ, DA, IT, JP, PL
updated TR_PERIOD and TR_INTERVAL for JP
* added TR_PERIOD, TR_INTERVAL, TR_FUNC for SE
* implemented TR_SF_SWITCH and logic to change between TR_SWITCH and TR_SF_SWITCH
* 212x64 radios: single source for #define TR_LSW_HEADERS in language files
deleted redundant defines
* changed 128x64 and 212x64 SF SD Logs to same logic as colorlcd with
- minimum log interval 0.1s
- maximum log interval 25.5s
- default log interval 1.0s
TX12_Sim and X9D_Sim tested ok
* migrated functional changes due to PR #2992
* missed updating TW language file
* fix: Always `STR_SF_SWITCH` regardless of SF
Co-authored-by: Peter Feerick <peter.feerick@gmail.com>
* Only attach SD card in USB storage mode
* Added compile time option FWDRIVE (default OFF) to enable attaching also the firmware drive via USB, when attached in mass storage mode.
* Re-trigger GitHub Actions
* chore: Trailing whitespace cleanup
Peter Feerick