* fix(imu): reset error counter on successful IMU query
Please note that the HAL already handles busy I2C bus, so that we should not run into the case where the bus is used and another query is started. However, if that happens, HAL_BUSY will be returned, which leads to -1 being returned in our functions, thus increasing the error count until the sensor stops working.
* fix(imu): move imu init into mixer task
Fixes a race condition between init and use.
* WiP: new module interface
* WiP: softserial timer DMA
* WiP: setup() and send() in one step
and remove methods specific to internal or external module
* fixes and extra port config
* horus targets
* module ports have moved
* T8 support (only internal module)
* fix nv14
* stupid GCC....
* disable BT
* remove nv14 telem driver
* remove old aux serial driver
* Move module buffers out of pulses.h
* Soft serial fixes and PXX1 support
* Fixed PPM module output
* Fixed CLI
* compilation fixes
* Ported bluetooth and flysky gimbal to new serial driver
* Re-enable soft-serial RX
* fixes and cleanup
* nv14 fixes
* Fix flysky gimbals
* Ghost module
* 16 bytes of RAM
* Remove getByte from module API
* Ghost cleanup
* fix: _half_duplex_input() must be called after usart init
* WiP
* more cleanup
* Remove board specific settings from PXX1 / PXX2 drivers
* A bit of PXX2 header cleanup
* Add support for OVER8 and ONEBIT
* Add some support for inverters (NV14 / EL18)
* Support NV14 power fixes in generic board
* Fix polarity handling
* Fix RX DMA
* Fix mixer not running
* Add soft-serial polarity control
* Quick fix for telemetry polling while module port is changed
* Fix bootloader DEBUG
* Fix MPM telemetry
* Fix pulse start
* DSM2 soft-serial fallback
* DSMP async module restart
* Fix CRSF LUA upstream
* Remove global variable telemetryProtocol
* Use HAL/LL constants
* Fix various issue with AFHDS3 and NV14/EL18 internal module
* Fixed S.PORT unit tests
* fix: update widx after writing at current index
* fix: init error condition
* Fix: possible infinite loop in _find_port()
* Add support for bidir S.PORT init
* Add support for "getLastByte" in HW serial driver
* PXX1: Add support for S.PORT based on IDLE callback
* Fix rebase error
* Fix softserial _rx_fifo_push()
* Add softserial support for waitForTxCompleted()
* Fix MPM flashing (internal / external)
* Fixed external MPM
* Activate RX DMA on internal module
Seems to work with serial passthrough without issues, at least on the L3R PRO.
* Fix softserial DMA on stdlcd F4 targets
* Add softserial support for 32bit timers (mostly TIM2)
* More precise soft-serial
* Fix MPM update using inverters & HW uart
* Raise S.PORT DMA/USART IRQ prio to achieve faster switching to input
* Remove useless delays
* Fix flashing external ELRS module
* Added a retry mechanism for FrSky S.PORT update
* Remove useless enableRx()
* External FrSky modules are all flashed via S.PORT
* Remove power management unit update
This was only used on the first batch of X-lite.
* migrated stack diagnostics (available, free) to using built in FreeRTOS builtin function
Note: main stack must be and is treated differently as it is not under FreeRTOS control. main stack is painted by the STM32 startup routine. free main stack is calculated checking the remaining painted stack area.
* corrected my merge error
* missed a blank
* CMake cleanup and simplifications
* Position Independent Code is need for radiolib_native
* Some more cleanup & repair
* Fix SIMU_SRC scope issue
* fix: avoid warnings due to assembler statements from StdPeriph on arm64 native
This allows for the timeout checks in I2C code to work properly as they are based on SysTick IRQ, which is started by FreeRTOS when the scheduler is started.
Resolves#803
- Allows the radio main application to start correctly when coming from an app in RAM
- Refactoring of the `UNEXPECTED_SHUTDOWN()` process
- Saves the RTC battery as BACKUP RAM is not needed on normal shutdown
- On PWR OFF on an ALERT, the radio won't show the next alert before shutting down
- Bootloader flashable through the SD Manager
